Panel & Polish logo: a dark sedan in profile inside a futuristic scanner ring, an orange targeting reticle locked onto a dent in the rear door — Panel & Polish, dents out, lights clear, paint shining

Panel & Polish — exterior restoration in Estevan & Southeast Saskatchewan: paintless dent repair, headlight restoration and paint polishing — dents out, lights clear, paint shining, without repainting.

+1 (250) 618-5184 panpolpdr@gmail.com Panel & Polish on Facebook
Estevan & Southeast Saskatchewan

Dents out.
Lights clear.
Paint shining.

Panel & Polish

Exterior restoration — body panels, headlights & paint

Three ways to bring a vehicle’s body back — without repainting it. Paintless dent repair, headlight restoration and machine paint polishing, all under one name. If it’s on the outside of your car and it can be restored instead of replaced, that’s our work.

Send a photo — free quote

A dent, your headlights, or the whole car — no obligation. If we can’t fix it, we’ll tell you straight.

Factory paint stays No filler, no repaint Cloudy headlights made clear Swirls & dull paint polished out
Before and after, labelled: a dent beside the handle of a grey car door, removed so the reflections run clean and straight in the after photo
Real Panel & Polish repair: a door dent right under the handle — removed with paintless dent repair, no paint, no filler. In the “after”, the reflections run clean and straight again.

One brand, three services

Everything we do is about the body of the vehicle — the panels, the lights and the paint. No interior cleaning, no mechanical work. Pick the one you need, or combine them in a single visit.

Not a body shop, not a car wash. A body shop sands, fills and repaints. A detailer cleans. We sit in between: we restore what’s already on your vehicle — straighten the panel, clear the lens, polish the paint — so nothing needs to be replaced or repainted.

Service 01 — Paintless Dent Repair

Dents fixed, paint untouched

If the paint is intact, there’s a good chance the dent can come out — without touching a spray gun. The metal is gently worked back into shape from behind the panel.

Door dings

Parking-lot dings from other car doors, shopping carts and tight garages — the most common job we do.

Small dents

Hood, roof, fender and trunk dents from fallen branches, sports balls, and everyday bumps.

Hail damage

Saskatchewan storms leave dozens of small dents across the roof and hood. PDR is the standard way to fix them — panel by panel, paint intact.

Creases

Longer, sharper damage along a body line. Many creases come out fully; deep ones may reach about 90% — we’ll tell you honestly from your photo.

Mobile service: most PDR jobs are done in under an hour, right at your home or workplace in Estevan & area. No drop-off, no rental car, no waiting days for your vehicle back.

PDR vs. a body shop

For the right dent, paintless repair wins on almost every count. Here’s the honest comparison:

Paintless dent repair
Body shop
Factory paint stays

The metal is gently worked back into shape from behind the panel. Your original paint — and your car’s value — stay intact.

Sanded & repainted

The panel is sanded, filled, primed and painted. Colour match is never quite the factory finish.

No filler, ever

Nothing is hidden under body filler that can crack or shrink years later.

Filler under the paint

Standard practice — the dent is filled level, then painted over.

A fraction of the cost

No paint, no materials, no booth time — a typical ding costs a fraction of a conventional repair.

Labour + paint + materials

Prep, filler, primer, paint and clear coat all add up, even for a small dent.

Done the same day

Most jobs take under an hour, at your location. You keep driving your car.

Days without your car

Drop-off, shop queue, curing time — often several days from start to finish.

Service 02 — Headlight Restoration

Cloudy headlights, clear again

Headlight lenses are plastic. Sun and road wear turn them yellow and foggy over the years — the light gets dimmer, night driving gets harder, and the whole front of the car looks tired. In most cases the lens doesn’t need replacing. It needs restoring.

Before and after photograph of one car headlight: the left half of the lens is yellowed, cloudy and crazed, the right half is restored crystal clear with the reflector and orange indicator sharp behind it
Example comparison — one lens, two halves. Left: the yellowed, oxidized layer that builds up over years. Right: the same lens polished clear and sealed, with the reflector sharp behind it. Send us a photo of your own headlights and we’ll tell you honestly whether yours will come back like this.

What we do

  • The cloudy, oxidized layer is carefully sanded and polished off the outside of the lens, step by step.
  • The lens is polished back to clear, so the beam shines through the way it was meant to.
  • A protective sealant goes on top to slow the clouding from coming back.
  • Both headlights are done as a pair, so they match.

Why it’s worth doing

  • Safer night driving — a foggy lens scatters your headlights. A clear lens puts the light back on the road, where you need it on dark Saskatchewan highways.
  • Costs far less than new lamps — replacement headlight assemblies can run into hundreds of dollars per side. Restoration keeps your original lights.
  • The car looks newer — clear headlights change the whole face of a vehicle, especially before selling it.
  • Quick job — done at your place in Estevan & area, usually in about an hour for the pair.

The honest part: restoration fixes cloudiness on the outside of the lens. If a lens is cracked, has moisture or damage inside it, or the chrome reflector inside is peeling, polishing won’t fix that — the lamp itself needs replacing, and we’ll tell you from your photo before you spend anything.

Service 03 — Paint Polishing & Correction

Dull paint, brought back to gloss

Even a well-kept car slowly loses its shine: automatic washes and years of weather leave fine swirl marks, light scratches and a faded, flat look called oxidation. Machine polishing removes a microscopic layer of tired clear coat and levels those fine marks out — the colour underneath is still there, it just needs uncovering.

Photograph of paint correction: on the left, a black car hood covered in circular swirl marks under an inspection light; on the right, a dual-action polisher with a yellow pad working glossy black paint back to a deep shine
Example comparison — swirls in, gloss out. Left: a black hood covered in swirl marks, lit up under the inspection light — this is the tired clear coat polishing removes. Right: a machine polisher at work on glossy paint. That’s the process that levels the fine marks out and brings the deep shine back.

What polishing fixes

  • Swirl marks — the fine spider-web circles you see in sunlight, mostly from washing and drying.
  • Light scratches — shallow marks in the clear coat from brushes, branches, keys and everyday use.
  • Oxidation & fading — dull, chalky-looking paint, worst on hoods and roofs that face the sun.
  • Lost gloss — paint that’s clean but just doesn’t shine anymore. Polishing is what brings the deep, wet-looking shine back.

How it works

The car is washed and the paint is decontaminated first — polishing dirty paint just grinds the dirt in. Then the paint is machine-polished panel by panel, checked under proper light as we go, and finished so the gloss is even across the whole vehicle.

It can be one panel that bothers you, the worst areas, or the full vehicle. A full polish takes real time — several hours of machine work — so this service may need a drop-off or a shaded spot to work in, rather than a quick driveway visit. We’ll sort that out with your quote, honestly and upfront.

What polishing is not: it’s not washing, waxing or interior detailing — we don’t clean interiors. And it has limits: a scratch you can feel with a fingernail has usually gone through the clear coat, and stone chips or peeling paint can’t be polished away — those need paint. From your photos, we’ll tell you what will come out and what won’t.

How it works

Same simple process for all three services — it starts with a photo.

1

Send a photo

For a dent: straight on, plus one at an angle so the depth shows. For headlights: a close-up of each lens. For polishing: the whole car in daylight, plus close-ups of the worst panels. Send them on Messenger or by email — or call or text us to get started.

2

Get a free quote

Every vehicle is different, so there’s no price list — we quote your actual job from the photos, and tell you honestly what result to expect. Free, and no obligation.

3

We do the work

Dents and headlights are usually done at your home or workplace in Estevan & area, most in about an hour. A full paint polish takes longer and may need a drop-off — we’ll agree on that with your quote.

Real work

Our actual dent repairs, photographed under a PDR line board — the light that shows every ripple in the metal. The last two photos are labelled “before” only: that’s the kind of damage we assess from your photo before quoting.

Before and after pair: a dent at the handle of a black car door under a line board, with the reflections wavy before and smooth after the repair
Door dent at the handle, black sedan. Right at the handle is tight, awkward access — the reflections tell the story: bent and wavy before, smooth after.
Before photo only: a sharp, deep dent on a dark car panel, its distortion visible in the warm reflection of the line board
Before — sharp dent, dark panel. A small dent, but sharp and deep: the reflection folds in on itself around it. Dents like this are assessed panel by panel — some come out fully, some honestly can’t.
Before photo only: a crease dent beside the fuel door on a white rear fender, visible as a sharp fold in the reflection
Before — dent by the fuel door, white fender. The crease runs right beside the fuel door, where access behind the panel is limited. This is exactly the kind of photo to send us — straight on, in good light — for an honest quote.

Straight answers

No sales talk — here’s what each service can and can’t do.

Paintless dent repair

Can every dent be fixed with PDR?

No — and we’ll tell you if yours can’t. PDR works when the paint is not cracked or broken and the metal hasn’t been stretched too far. If the paint is damaged or the panel needs conventional repair, we’ll say so honestly instead of taking the job.

Will a dent repair look 100% perfect?

Most door dings and small dents come out completely — you won’t find them again. Sharp creases or stretched metal may reach about 90% rather than a full 100%. From your photo, we’ll tell you upfront what result to expect.

Does PDR hurt my car’s paint or value?

The opposite. Because the factory paint is never sanded, filled or resprayed, the panel keeps its original finish — which is exactly what buyers and appraisers look for.

Headlight restoration

My headlights are yellow and foggy. Can they really come back?

In most cases, yes. The cloudiness is a worn, oxidized layer on the outside of the plastic lens. We polish that layer away, polish the lens clear, and seal it. If the damage is inside the lamp — moisture, a cracked lens, peeling reflector — polishing can’t fix it, and we’ll tell you from your photo.

How long does headlight restoration last?

The sealant we apply protects the lens and slows the clouding down a lot, but no restoration is permanent — sun exposure slowly wears any lens again over the years. Expect the clarity to last far longer than a quick wipe-on product, and the lenses can be restored again in the future if they eventually haze over.

Is it cheaper than new headlights?

By a wide margin, in most cases. New headlight assemblies for many vehicles cost hundreds of dollars per side before labour. Restoration keeps your original lamps and costs a fraction of replacing them — send a photo for an exact quote.

Paint polishing

Is polishing the same as detailing or waxing?

No. Detailing is cleaning — washing, and interior work, which we don’t do. Wax sits on top of the paint and hides flaws for a few weeks. Machine polishing actually removes the fine swirls, light scratches and oxidation from the clear coat itself, which is why the gloss it brings back lasts.

Will polishing remove all my scratches?

It removes scratches that live in the clear coat — swirls and light marks. A simple test: if you can feel a scratch with your fingernail, it’s usually too deep to polish out fully, though polishing often makes it far less visible. Stone chips and peeling or cracked paint need paint work, not polishing — we’ll be straight with you about your car from the photos.

How long does a full polish take?

Longer than our other services — proper machine polishing is slow, careful work, panel by panel, so a full vehicle typically takes several hours. That’s why it may need a drop-off or a shaded workspace rather than a quick mobile visit. Your quote will include a time estimate.

Booking & prices

How much does it cost?

There are no fixed prices, because no two jobs are the same — dent size and access, lens condition, and how much paint needs polishing all matter. Send photos and you’ll get a free, exact quote for your vehicle before any work starts.

Can I combine services?

Yes — that’s the point of Panel & Polish. A dent repair plus headlights, or polishing after hail repair, can often be done in one visit or one drop-off. Mention everything that bothers you when you send your photos, and we’ll quote it together.

Where do you work?

We’re based in Estevan, covering Southeast Saskatchewan. Dent repair and headlight restoration are mobile — we come to your home or workplace. Paint polishing may need a drop-off or shaded spot, depending on the job.

Get your free quote

Call, email or send us photos on Messenger and we’ll come back with an exact price and a time estimate. No obligation — if a service isn’t right for your vehicle, we’ll tell you.

Message us on Messenger

Panel & Polish · Serving Estevan & Southeast Saskatchewan · Dent repair & headlights — mobile, we come to you

Call us Free quote — send a photo